Chicago Pneumatic
Authorized Distributor
888-883-5144

Pneumatic & Electric Sump Pumps, Sludge Pumps

Submersible water pumps

 

CP 1110/CP 0020 Sump Pumps
Part Number Description
Weight
(lb)
Water outlet
(in)
Min. water depth
(in)
Air consumption
(cfm)
Overall diameter
(in)
Performance
(gal/min)
 Price
T022224 CP 0010 Sump pump 33.0 2 7⁄8 100 8 1⁄4x9 250-125 gal/min at 90 ft $1,880.00
T022185 CP 0020 Sump pump 58.0 2 1⁄2 7⁄8 110 9x11 3⁄4 340-155 gal/min at 90 ft $2,545.00

The CP 0010 and CP 0020 submersible pumps are designed with the performance and durability which makes them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Both models will pump down to within 7⁄8" (22 mm) from base.

  • Single-stage centrifugal units driven by powerful vane motors
  • Double seals protect bearings and motor from water and mud
  • Integral oiler provides continuous lubrication
  • Integral strainer, air inlet valve
  • Bronze impeller
  • Cast-iron housing
  • CP 0010 has exhaust pipe 1" NPT x 16" long
  • CP 0020 has exhaust pipe 1-1⁄4" NPT x 18" long

NOT INTENDED FOR PUMPING FLAMMABLE FLUIDS AND MUST NOT BE USED FOR DOING SO

Free ground shipping to the continental US.

 

CP 0010 Performance
Air Consumption at 90 psi: 100 cfm
Total Head
(ft)
Discharge Rate
40 psi
(gal/min)
60 psi
(gal/min)
80 psi
(gal/min)
90 psi
(gal/min)
100 psi
(gal/min)
10 160 220 240 245 255
20 140 205 230 240 250
30 120 185 215 230 245
40 90 160 200 215 230
50 60 135 175 195 210
60 10 105 155 175 195
70 - 80 130 150 170
24.3 - 60 95 125 155
90 - - 75 105 125
100 - - 55 75 95
CP 0020 Performance
Air Consumption at 90 psi: 110 cfm
Total Head
(ft)
Discharge Rate
40 psi
(gal/min)
60 psi
(gal/min)
80 psi
(gal/min)
100 psi
(gal/min)
10 230 285 325 340
20 195 265 315 330
30 150 245 300 320
40 130 220 280 305
50 100 190 260 280
60 65 165 230 260
70 - 125 200 225
80 - 80 160 190
90 - - - 155
Accessories
S038723 Air Exhaust Pipe for CP 0010 $41.65
C086080 Air Exhaust Pipe for CP 0020 $45.14
AIRH-19-50R Contractors Air Hose $90.00
WCSML Whip Check $12.50

Sludge Pumps

CP 0077 Sludge Pump
Part Number Description
Weight
(lb)
Water outlet
(in)
Max. suction lift
(ft)
Air consumption
(cfm)
Performance
(gal/min)
Water inlet
(in)
 Price
T024005 CP 0077 Sludge pump 152.0 2-1⁄2 20 85 90-36 gal/min at 90 psi 2-1⁄2 $2,545.00


The CP 0077 sludge pump easily handles water containing 15% solids and particles up to 1" (25 mm) in size. It is suitable for pumping seawater and certain corrosive chemicals.

  • Operates on venturi/ejector principle - no motor or diaphragm to wear out.
  • Exhaust muffler - reduces sound level

NOT INTENDED FOR PUMPING FLAMMABLE FLUIDS

 

CP 0077 Performance at 90 psi, zero suction head
Total Head
(ft)
Discharge Rate
(gal/min)
25 90
50 78
75 68
100 60
150 48
175 36
Parts & Accessories
F027762 Inlet Hose Nipple 3" unthreaded x 2-1⁄2" BSP $33.49
R146385 Outlet Nipple 2-1⁄2" NPT (both ends) $15.47
R146383 Outlet Nipple 2-1⁄2" NPT street elbow $50.02
AIRH-19-50R Contractors Air Hose $90.00
WCSML Whip Check $12.50

Dewatering pumps

 CPWE pumps have evolved from a long history of improvements and are designed to be portable, easy, reliable and efficient.  They cater to a wide range of dewatering applications from mines, process water, municipal and general dewatering.  Low weight and high performance becomes a game changer when you have to move pumps to multiple locations.  This is where CPWE pumps make the difference and become a preferred choice of customers.  The modular design helps in servicing the pump with ease.  With the inbuilt electrical protections inside a sealed unit, installing the pump is a matter of minutes.  These small things make a difference when you have to be quick and flexible in the field.

Media:  Water density up to 68.67 lb/cu ft

Design:  Top Discharge

Solid Handling:  0.16-0.47in PH values:  from 5 to 8

FEATURES:

  • Ergonomic Lifting Handle - Ensures pump is always vertical while lifting
  • Flexibility - Discharges can be mounted vertical or sideways as required
  • Main Features - Thermal switches
  • Modular Sealing Solution - Based on pump size, the sealing system is adapted to provide the best solution
  • High Corrosion Resistance - Unique aluminum alloy offers perfect combination of strength, light weight and corrosion resistance
  • Easy Access - All electrical components are assembled in a water tight top cover
  • Improved Cable Sealing - Ensures protection against water leakage from cable entry
  • Motor Protection - Class F motors, with thermal switches in each winding
  • Extended Performance - Pump design ensures all around motor cooling for better performance
  • Improved Wear Resistance - High chrome (55HRC) impellers provide higher wear resistance

APPLICATIONS

  • General dewatering
  • General construction
  • Mining
  • Tunneling

SPECIFICATIONS

Model Part Number Voltage

Max Flow

(gpm)

Max Head

(ft)

 HP

Discharge

Connection

NPT (in)

 Price
CPWE D04N 9753300335 110V, 1ph 66 37 0.5 2 $345.00
CPWE D08N 9753300337 115V, 60Hz 1˜ 86 50 1 2 $505.00
CPWE D10N 3081620272 115V, 60Hz 1˜ 117 52 1.5 2 $1,415.00
CPWE D10N 3081620273 220-240V D 60Hz 119 52 1.3 2 $1,415.00
CPWE D10N 3081620274 440-480V Y 60Hz 119 52 1.3 2 $1,415.00
CPWE D30N 3081620275 220-240V D 60Hz 1˜ 200 90 2.7 3 $2,140.00
CPWE D30N 3081620276 220-240V D 60Hz 190 83 2.5 3 $2,140.00
CPWE D30N 3081620277 440-480V Y 60Hz 190 83 2.5 3 $2,345.00
CPWE D40N 3081620278 220-240V D 60Hz 450 72 4  3 $2,345.00
CPWE D40N 3081620279 440-480V Y 60Hz 450 72 4 3 $4,765.00
CPWE D50H 3081620280 440-480V Y 60Hz 310 135 8.5 3 $4,485.00
CPWE D50N 3081620281 440-480V Y 60Hz 620 83 8.5 4 $4,485.00
CPWE D50N 3081620282 220-240V D 60Hz 620 83 8.5 4 $4,485.00
CPWE D60H 3081620283 440-480V Y 60Hz 340 170 11.5 3 $5,575.00
CPWE D60N 3081620285 440-480V Y 60Hz 700 100 11.5 4 $5,535.00
CPWE D60N 3081620286 440-480V Y 60Hz 700 100 11.5 4 $5,535.00


 

Accessories
  D30/D40/S30     D50/D60  
Repair Kit Seal Unit  3081690446 $157.13   3081690253 $579.31
O-Ring Kit  3081690472 $105.46   3081690296 $133.37
Zinc Anodes Kit  3081690474 $361.63   3081690291 $402.00
Wear Parts Kit - D30L 470W224913 $671.43      
Wear Parts Kit - D30N/D50N 470W224915 $698.83   3081690235 $694.80
Wear Parts Kit - D50H       3081690236 $605.23
Wear Parts Kit - D40N/D60N 470W743435 $454.58   3081690240 $651.20
Wear Parts Kit - D60H       3081690241 $519.40
Wear Parts Kit - S30 50Hz 1ph/60Hz 30ph 3081690415 $519.65      
Wear Parts Kit - S30 60Hz 1ph 3081690695 $553.23      
Oil - Submersible Pump 1636302422 $17.14      

 

CPWE Sludge pumps

 CPWE pumps have evolved from a long history of improvements and are designed to be portable, easy, reliable and efficient.  They cater to a wide range of dewatering applications from mines, process water, municipal and general dewatering.  Low weight and high performance becomes a game changer when you have to move pumps to multiple locations.  This is where CPWE pumps make the difference and become a preferred choice of customers.  The modular design helps in servicing the pump with ease.  With the inbuilt electrical protections inside a sealed unit, installing the pump is a matter of minutes.  These small things make a difference when you have to be quick and flexible in the field.

Media:  Water density up to 87.4 lb/cu ft

Design:  Bottom side discharge

Solid Handling:  1-2 in; PH Values from 5 to 8

FEATURES:

  • Ergonomic Lifting Handle:  Ensures pump is always vertical while lifting
  • Easy Access:  All electrical components assembled in a water tight top cover
  • Motor Protection:  Class F motors, with thermal switches in each winding
  • Higher Solid Handling:  Sludge pumps can handle solids up to 50mm
  • Robust Design:  Base of the pump ensures stability while able to pass large solids
  • Improved Cable Sealing:  Ensures protection agains water leakage from cable entry
  • Dry Running Capabilities:  Improved rib design offers external cooling to motor for extended running time
  • Easy Inspection:  External oil inspection plug for quick inspection of oil
  • Modular Sealing Solution:  Based on pump size, the sealing system is adapted to provide the best solution
  • Sustainable Performance:  High chrome (55HRC) impellers provides higher wear resistance

APPLICATIONS

  • Construction
  • Mining
  • Tunneling
  • Tank Clean-out
  • Trench and Pond Cleaning

SPECIFICATIONS

Model Part Number Voltage

Max

Head

Max Flow

Rated Output

Max Power Input

Discharge 

Connection (NPT)

Max Solid

Handling Size

Weight

Dimensions

 Price
      ft gpm hp kW in in lbs H x W x Dia. in  
S04N 9753300336 111V 1˜ 32.8 58.1 0.5 - 2 1 22.1 14.7x10.9x9.5 $345.00
S30N 3081620425 220-240V D 60Hz 1˜ 51 190 3.0 2.8 3 2 55 24.3x12.8x9.8 $3,150.00
S30N 3081620426 220-240V D 60Hz 61 230 4.0 3.6 3 2 55 24.3x12.8x9.8 $3,150.00
S30N 3081620427 440-480V Y 60Hz 61 230 4.0 3.6 3 2 55 24.3x12.8x9.8 $3,150.00
S50N 3081620758 220-240-V Y 60Hz         4 2      $5,130.00
S50N 3081620760 440-480V Y Ser 60Hz         4 2      $5,130.00
S60N 3081620767 220-240V Y 60Hz 100 420 9.2 8.0 4 2 143 34.2x17.7x13.8 $5,775.00
S60N 3081620769 440-480V Y Ser 60Hz 100 420 9.2 8.0 4 2 143 34.2x17.7x13.8 $5,775.00


 

Accessories
  S30     S50/S60  
Repair Kit Seal Unit  3081690446 $157.13   3081690253 $579.31
O-Ring Kit  3081690473 $53.05   3081690611 $61.04
Zinc Anodes Kit  3081690475 $364.24   3081690610 $429.38
Float Switch Kit 1607939900 QUOTE   3081690558 $106.83
Wear Parts Kit - S30 50Hz 1ph/60Hz 30ph 3081690415 $519.65      
Wear Parts Kit - S30 60Hz 1ph 3081690695 $553.23      
Wear Parts Kit - S50N 50Hz       3081690456 $434.13
Wear Parts Kit - S50N 60Hz       3081690682 QUOTE
Wear Parts Kit - S60N 50Hz       3081690607 $529.42
Wear Parts Kit - S60N 60Hz       3081690608 $541.50
Oil - Submersible Pump 1636302422 $17.14   1636302422 $17.14

 


Forgot password?